Turntable Pallet Wrapper With Sheet Dispenser
Turntable pallet wrapper with sheet dispenser to apply top sheet onto pallet. The pallet is wrapped on 5 sides for better water-proof and dust-proof. Wrapper with top sheet dispenser is excellent choice for pallet loads that need long term storage or long distance transportation.
Integrated pallet wrapping system is composed of turntable stretch wrapper and top sheet dispenser. The sheet dispenser is to apply top sheet onto pallet. The will be wrapped on 5 sides for better water-proof and dust-proof. Wrapper with top sheet dispenser is ideal choice for pallet loads that need long term storage or long distance transportation.
Sheet dispenser can insert film sheet between layers while palletising. For better protection of pallet loads.
Technology data:
Max load size(mm) | 1200 (L)×1100(W)×1600(H)mm |
Packing efficiency | 20-40 loads / hour |
Rotating turntable speed | 3-12rpm |
Height of turntable | 500mm from floor |
Power supply | 380V 50HZ 3Phase |
Max load capacity | 2000kgs |
Wrapping requirement | wrapping bottom (start/finish) height can be adjustable from 90mm |
Working ambiance | Indoor, normal temperature |
Turntable | Diameter: 1800mm |
Wrapping material
Utility:
Compressed air
Pressure: 0.5-0.6 MPa
Dew point: +2-+10℃ (7bar, +2-+10℃)
Air consumption: 1000ml/min
Supply scope
Rotating turntable
Turntable diameter: 2000mm
Turntable height: 500mm from floor
Roller dia.: 76mm*3mm, galvanized
Center distance between rollers: 119mm
Slew bearing driven
Film carriage
Open-door type film carriage, pre-stretch up to 250% (1m to 3.5m)
Film carriage lifting driving: chain driving, good stability and high reliability
Driving reducer: worm gear reducer
Open-door type film carriage
Film feeding & cutting device
When stretch wrapping finish, the film will be cut and clamped automatically.
Hot melt cutting wire to cut the film, and the film tail will be welded against pallet to keep it tightly stick onto pallet, no film tail after welding.
Pneumatic component: FESTO brand
FM-1800 top sheet dispenser
Top sheet length: adjustable according to the pallet
Auto film cutting with knife blade, pneumatic driven
Film roll width: Max. 1800mm
Film roll outer diameter: 260mm
Film roll inner diameter: 76.2mm
Top-sheet length: 1100-1800mm (max) adjustable
Film roll is placed above chain conveyor, to be designed as low as possible for easier film loading
Control system
PLC control system with touch screen, 4-8 sets of parameter settings available
Cut film automatically after wrapping finished
Film tension control adjustable; Carriage up/down speed adjustable
Safety tower light alarm
E-Stop button, relay, lockable ON/OFF switch included for deactivate every form of energy
Wrap/no wrap selector switch on the cabinet for pallet by-pass.
